Miele ESW 761-25 MasterChef Manual do utilizador - Página 4
Procurar online ou descarregar pdf Manual do utilizador para Forno Miele ESW 761-25 MasterChef. Miele ESW 761-25 MasterChef 32 páginas. Built-in warming drawer
Também para Miele ESW 761-25 MasterChef: Manual de Instruções (33 páginas), Dimensões (2 páginas)
Imprimir página
IMPORTANT SAFETY INSTRUCTIONS
WARNING- When using the warming
drawer follow basic precautions,
including the following:
Read all instructions before instal-
lation or use of the warming drawer
to prevent injury and machine
damage.
This appliance is only intended for
the domestic use of holding cooked
food at serving temperature. Any
other use is at the operator's own
risk and could be dangerous.
This appliance conforms to all
uniform safety codes and regu-
lations. The manufacturer can not be
held responsible for damage or
injury caused by improper use of
this appliance.
Keep these operating instructions in
a safe place and pass them on to
any future user.
SAVE THESE INSTRUCTIONS!
4
Technical safety
Before installation make sure that
the voltage and frequency listed on
the data plate correspond with the
household electrical supply. This data
must correspond to prevent injury and
machine damage. Consult a qualified
electrician if in doubt.
Be certain your appliance is
properly installed and grounded by
a qualified technician.
To guarantee the electrical safety
of this appliance, continuity must
exist between the appliance and an
effective grounding system. It is
imperative that this basic safety
requirement be met. If there is any
doubt, have the electrical system of the
house checked by a qualified
electrician.
The manufacturer cannot be held
responsible for damages caused by the
lack, or inadequacy of, an effective
grounding system.
Installation, repair and mainten-
ance work should be by a Miele
authorized service technician. Work by
unqualified persons could be
dangerous and may void the warranty.
Before installation or service,
disconnect the power supply to the
work area by removing the fuse,
"tripping" the circuit breaker, or
unplugging the unit.