Miele DA 1160 Instruções de utilização e de instalação - Página 21

Procurar online ou descarregar pdf Instruções de utilização e de instalação para Campânula de ventilação Miele DA 1160. Miele DA 1160 32 páginas. Built-under ventilation hood
Também para Miele DA 1160: Informações (4 páginas), Instruções de utilização e de instalação (32 páginas), Instruções de utilização e de instalação (40 páginas)

Before installation read the

information in the "Appliance

Dimensions" and " Important Safety

Instruction" chapters.

This is especially crucial when using

the ventilation system at the same

time as another heat-producing

appliance that uses air from the

same room.

^ Remove the grease filter.

The casing of stainless steel models is

covered with a protective film to

prevent scratching during transport.

^ Remove the film from the casing and

from the grease filter frames before

installing. It can be removed without

tools.

A diverter must be inserted at the back

of the hood.

Its position depends on the operating

mode.

In air extraction mode, it guides the air

outside through an opening at the back

of the casing.

In air recirculation mode, it closes the

opening and guides the air to the outlet

at the front.

^ Check the position of the diverter.

^ If required, change the diverter

position to match the desired

operating mode.

Extraction

Recirculation

^ To do this, push on the two latching

hooks, pull the diverter out, turn it,

and push it back in until it clicks into

place.

Installation