Miele DA 230-2 Manual de operação e instalação - Página 27

Procurar online ou descarregar pdf Manual de operação e instalação para Campânula de ventilação Miele DA 230-2. Miele DA 230-2 32 páginas. Cooker

Imprimir página

All electrical work should be under-

taken by a suitably qualified and

competent person in strict accor-

dance with national and local safety

regulations.

Installation, repairs and other work

by unqualified persons could be

dangerous. The manufacturer can

not be held responsible for un-

authorised work.

Ensure power is not supplied to the

appliance while installation or repair

work is being carried out.

U.K., IRL, NZ, ZA: The cooker hood is

supplied for connection to an a.c.

230 V single phase 50 Hz supply.

AUS: The cooker hood is supplied for

connection to an a.c. single phase

240 V, 50 Hz supply.

The voltage, rated load and fusing are

given on the data plate. This is visible

when the grease filters have been re-

moved. Ensure that these match the

household mains supply.

For U.K.: Connection should be made

by a double pole fused spur connection

unit. The On-Off switch should be easily

accessible after the appliance has

been built in.

When switched off there must be an

all-pole contact gap of 3 mm in the

switch (including switch, fuses and re-

lays according to EN 60 335).

If the socket is not accessible after in-

stallation (depending on country) an

additional means of disconnection must

be provided for all poles.

For extra safety it is advisable to install

a residual current device (RCD) with a

trip current of 30 mA (in accordance

with DIN VDE 0664, VDE 0100 Section

739).

The wires in the mains lead are col-

oured in accordance with the following

code:

Green/yellow = earth

Blue

= neutral

Brown

= live