Miele DA 249-4 Instruções de utilização e de instalação - Página 11
Procurar online ou descarregar pdf Instruções de utilização e de instalação para Campânula de ventilação Miele DA 249-4. Miele DA 249-4 40 páginas. Ventilation system
Também para Miele DA 249-4: Instruções de utilização e de instalação (40 páginas), Instruções de utilização e de instalação (40 páginas), Instruções de utilização e de instalação (44 páginas)
Imprimir página
The rangehood works with
. . . air extraction:
The air is drawn in and cleaned by the
stainless steel outer filter and the
grease filter, and then directed outside.
If the on-site ventilation system does
not have a non-return flap, then the
non-return flap supplied with the
appliance must be fitted
Having a non-return flap fitted in the
ducting ensures that air, once ducted
to the outside, cannot get back into the
room again.
The flap is closed when the rangehood
is switched off.
When the rangehood is switched on,
the non-return flap opens for the
cooking vapours to be blown directly
outside.
Please note, the performance of
this rangehood hinges greatly on
the installed ducting to vent the
vapours. Poor choice of ducting
results in poor rangehood
performance. For ducting
recommendations, please refer to
the relevant section in these
operating instructions or contact
a specialised installer.
Modes of operation
. . . air recirculation:
(available as an optional extra with a
conversion kit and charcoal filter: see
"Technical Data")
The air is drawn in and cleaned first by
the stainless steel outer filter and the
grease filter and then by a charcoal
filter. The cleaned air is then
recirculated back into the kitchen
through grilles in the top of the
rangehood extension piece.
Charcoal filters are available to order
through your Chartered Agent or from
Miele. (See back cover for contact
details and "Technical Data" for model
number).
Before using the rangehood in
recirculation mode, ensure that the
charcoal filter is in place. See
"Cleaning and care".
. . . an external motor:
(EXT models only)
EXT models are designed to be
connected to an external motor located
outside the room.
The external motor is connected to the
rangehood by means of a control
cable, and is operated by the controls
on the rangehood.
11