Miele DA 371 Manual de operação e instalação - Página 19
Procurar online ou descarregar pdf Manual de operação e instalação para Campânula de ventilação Miele DA 371. Miele DA 371 28 páginas. Cooker
If site conditions are not suitable for the
cooker hood to be used for air extrac-
tion, the appliance must be connected
for recirculation.
The following parts, available through
your Miele Dealer or from the Miele
Spare Parts Department, are required
for operating the ap-
pliance in recircula-
tion mode:
– Conversion kit for
recirculation mode
(ø125 mm):
Exhaust grille,
ducting, hose clip.
– Active charcoal filters (see "Techni-
cal data")
When fitting the cooker hood in a
wall unit the recirculation grille
has to be fitted in the top of the unit.
The exhaust connection
exhaust grille
using a suitable hose or flexible duct-
d
ing
If the front of the unit is ceiling height
(i.e, extractor canopies, ceiling
mounted units) then an appropriate
cut-out must be made in the front
panel
When fitting the ventilation grille
make sure that the slats in the grille
point towards the centre of the room
and not towards a wall or the ceiling.
Install the active charcoal filters (see
"Cleaning and care").
c
c
are joined together
.
e
.
b
and the
19