Miele DA 409 Instruções de utilização e de instalação - Página 20

Procurar online ou descarregar pdf Instruções de utilização e de instalação para Campânula de ventilação Miele DA 409. Miele DA 409 36 páginas. Ventilation system
Também para Miele DA 409: Instruções de utilização e de instalação (36 páginas), Instruções de instalação (1 páginas), Dimensões do produto (2 páginas), Manual de operação e instalação (40 páginas), Instruções de utilização e de instalação (36 páginas), Instruções de utilização e de instalação (36 páginas), Instruções de utilização e de instalação (36 páginas)

Imprimir página
Miele DA 409 Instruções de utilização e de instalação
^ After cleaning, leave the filters to dry
on an absorbent surface before
replacing them.
When removing the filters for cleaning,
also clean off any residues of oil or fat
from the now accessible housing to
prevent the risk of these catching fire.
When putting the grease filters back in
position, ensure that the locking clips
are facing down towards the hob.
If the grease filters are inadvertently
replaced upside down, insert a small
screwdriver blade into the slits to
disengage the clip.
^ After replacing the grease filter, press
the grease filter touch control for
approx. 3 seconds to re-set the
operating hours counter.
The indicator lamp will go out.
If the grease filters are cleaned before
the operating hours counter has
reached its maximum, the grease filter
touch control should be pressed for
approx. 6 seconds to reset the counter.
20
If the cooker hood is connected for
recirculation, a charcoal filter must be
inserted in addition to the grease filters.
It is designed to absorb cooking
odours.
It is fitted in the canopy above the

grease filters.

New filters can be purchased from
your Miele dealer or from the Miele
Spare Parts Department.
See back cover for contact details,
and "Technical data" for the model
number of the filter.
^ Before fitting or replacing a charcoal
filter, the grease filters must first be
taken out (see previous section for
instructions on how to do this).
^ Take the charcoal filter out of its
packaging.
^ Insert the charcoal filter into the
canopy. The tab for removing it
should be at the front.
When fitting for the first time:
^ Set the operating hours counter to
suit your requirements (see
"Operation").