Miele Imperial DWF 956-2 Instruções de utilização e de instalação - Página 12

Procurar online ou descarregar pdf Instruções de utilização e de instalação para Campânula de ventilação Miele Imperial DWF 956-2. Miele Imperial DWF 956-2 37 páginas.

Imprimir página

An indicator lamp shows when the

grease filter needs to be cleaned. The

operating hours counter for the grease

filter is set at the factory for a certain

number of hours but these can be

changed if required.

After this set time has elapsed, the

grease filter touch control indicator

lamp glows. The grease filter must then

be cleaned.

After the grease filter has been cleaned

and put back in place, the filter opera-

ting hours counter must be re-set.

– To do this press the grease filter

touch control and hold for about 4

seconds.

The indicator lamp will go out.

To check the percentage of the time set

already used:

– Use the On/Off touch control to

switch the fan on.

– Press the grease filter touch control.

One or several of the indicator lamps

above the power level touch control

will flash.

The number of flashing lamps indicates

the percentage of operating time set al-

ready used up.

1 lamp

= 25%

2 lamps = 50%

3 lamps = 75%

4 lamps = 100%

The number of operating hours used re-

mains in memory, even when the ap-

pliance is switched off or there is a

power cut.