HP 234664-002 - ProLiant - ML330T02 Manual de atualização - Página 6

Procurar online ou descarregar pdf Manual de atualização para Ambiente de trabalho HP 234664-002 - ProLiant - ML330T02. HP 234664-002 - ProLiant - ML330T02 16 páginas. Visualization and acceleration in hp proliant servers
Também para HP 234664-002 - ProLiant - ML330T02: Perguntas mais frequentes (4 páginas), Manual de implementação (35 páginas), Livro Branco Técnico (12 páginas), Atualização do firmware (9 páginas), Visão geral (20 páginas), Manual de implementação (26 páginas), Manual de Introdução (22 páginas), Manual de resolução de problemas (18 páginas), Manual de implementação (11 páginas), Manual de instalação (2 páginas), Manual de configuração (2 páginas), Manual de Introdução (19 páginas), Manual de atualização (9 páginas), Manual de Introdução (10 páginas), Manual de instruções de instalação (15 páginas), Resumo da tecnologia (9 páginas)

ISS Technology Update

Volume 7, Number 1

Interconnect options

The BladeSystem Tower Enclosure includes a signal midplane (Figure 2-2) that acts as a PCI Express (PCIe) bus to connect the

ports of embedded devices to the interconnect bays. It has eight device bay signal connectors (one for each half-height server

blade and two for each full-height server blade) and four interconnect module connectors (one for each interconnect bay). The

device connections are in groups of lanes. Each lane is a group of four pins (two sending traces and two receiving traces),

resulting in full-duplex communication. This combination provides a 1x (500Mb/s) transfer rate with 2x = 2 lanes (1Gb/s).

Storage Options

Both HP BladeSystem c3000 Enclosures offer a broad range of external and internal storage options.

• External storage options include NAS, iSCSI SAN, and fibre channel SAN from all of the major SAN and NAS vendors.

• For internal storage, HP offers the SB40c Direct Attach Storage Blade, the 448c Ultrium Tape Blade, and the All-in-One

SB600c Storage Blade.

The Onboard Administrator is a management controller module that includes a management processor, subsystem, and

firmware to support all the managed devices in the c3000 Enclosure. The Onboard Administrator aggregates the iLO 2

management processors on each server blade, which simplifies cable management and provides a graphical interface to

launch individual server iLO management interfaces. It also provides a secure single point of contact through the Insight

Display, a web GUI, or a command-line interface (CLI) for users performing basic management tasks on server blades or

switches within the enclosure.

Onboard Administrator collects system parameters related to thermal and power status, system configuration, and managed

network configuration. Onboard Administrator retrieves thermal information from the components in the enclosure. If the

enclosure's thermal load increases, the Onboard Administrator's thermal logic feature instructs the fan controllers to increase

fan speeds to accommodate the additional demand. Individual fan speeds can be adjusted to reduce noise and power

consumption and to compensate for airflow differences within the enclosure. The Onboard Administrator uses sophisticated

power measurement sensors to accurately monitor exactly how much power is being consumed and how much power is

available. Onboard Administrator uses real-time measured power data instead of maximum power envelopes, allowing

customers to deploy as many servers and interconnect modules as possible for the available power.

Figure 2-2. The Onboard Administrator module is preinstalled in a front-loading tray that also houses the HP BladeSystem Insight Display.