Miele S 648 Manual de Instruções - Página 43

Procurar online ou descarregar pdf Manual de Instruções para Aspirador de pó Miele S 648. Miele S 648 44 páginas. Miele operating instructions vacuum cleaners s 500 - s 548, s 600 - s 648
Também para Miele S 648: Manual de Instruções (48 páginas)

Imprimir página

All electrical work should be carried out

by a suitably qualified and competent

person in strict accordance with na-

tional and local safety regulations.

The voltage, rated load and fuse rating

are given on the data plate located un-

derneath the vacuum cleaner.

Please ensure that these match the

household mains supply.

The appliance is supplied with a cable

and moulded plug ready for connection

to a 230-240 V/50 Hz a.c. single phase

supply. The fuse rating is 13 A.

If the plug fitted is not suitable it must

be replaced by one that is.

Non-rewireable plugs BS 1363

If this machine or appliance is fitted

with a non-rewireable plug, the follow-

ing information applies: if the socket

outlets are not suitable for the plug sup-

plied with this product, it must be cut off

and an appropriate plug fitted. The fuse

carrier and fuse should be removed

from the old plug and disposed of. The

plug cut from the flexible cord should

then be disposed of and on no account

be inserted into any socket elsewhere

in the house (electric shock hazard).

The fuse cover must be re-fitted when

changing the fuse, and if the fuse cover

is lost the plug must not be used until a

suitable replacement is obtained. The

colour of the correct replacement cover

is that of the coloured insert in the base

of the plug, or the colour that is em-

bossed in words on the base of the

plug, (as applicable to the design of

plug fitted).

Electrical connection for the UK

The correct rating of the replacement

fuses that are ASTA approved to BS

1362 should be fitted. Replacement

covers may be purchased from your lo-

cal electrical supplier, electricity show-

room or Miele service agent.

Important

The wires in the mains lead of this ap-

pliance are coloured in accordance

with the following code:

Blue = Neutral

Brown = Live

As the colours of the wires may not cor-

respond with the markings identifying

the terminals in your plug, proceed as

follows: The wire coloured blue must be

connected to the terminal marked with

the letter "N" or coloured black. The

wire coloured brown must be con-

nected to the terminal marked with the

letter "L" or coloured red. Neither core is

to be connected to the earth terminal of

a three-pin plug.