Miele SEB 215 Manual de Instruções - Página 5

Procurar online ou descarregar pdf Manual de Instruções para Aspirador de pó Miele SEB 215. Miele SEB 215 13 páginas. Electrobrush
Também para Miele SEB 215: Manual de Instruções (13 páginas)

Imprimir página

Connect the Electrobrush to the

vacuum cleaner as shown in the

illustrations at the end of the operating

instructions.

illustration a

illustration b

This illustration shows connection to an

S 300 / S 400 series vacuum cleaner as

an example.

The position of the socket for connec-

ting the Electrobrush will depend on the

vacuum cleaner model.

protective cap must be removed from

the socket: see illustration c and d.

This Electrobrush is easily removed

enabling one of the other accessories

to be used.

^ Press the release button and pull the

suction tube with plug connector out

of the Electrobrush.

The cable will remain on the suction

tube.

When the Electrobrush is connected to

a cylinder vacuum cleaner, the cable

must be secured to the telescopic tube

and to the suction hose. Nine clips are

supplied for this:

– two for securing the cable to the

- see

– seven for running the cable along the

- see

^ Fit the clips to the suction hose

The Electrobrush is operated in

conjunction with the vacuum cleaner.

the

Some models, however, are fitted with a

switch which allows the Electrobrush to

be switched on and off separately.

The warning light on the Electrobrush is

switched on.

telescopic tube (already in position)

suction hose (these can be adjusted)

leaving approximately the same

distance between each clip.

when the Electrobrush is

If the warning light on the

Electrobrush is

blockage in the roller, see "Warning

and Safety instructions, Blocked

roller warning light".

, there is a