ALLMOVE X10 Pro Manual do utilizador - Página 12

Procurar online ou descarregar pdf Manual do utilizador para Scooter ALLMOVE X10 Pro. ALLMOVE X10 Pro 14 páginas.

Imprimir página

Battery Maintenance

The lithium-ion battery is built into the X10Pro Scooter. Do not disassemble the X10Pro

Scooter to remove the battery or attempt to separate it from the X10Pro Scooter.

When charging the X10Pro Scooter, only use the enclosed 1-pin charging cable provid-

ed by ALLMOVE. Use of any other charger or cable may lead to damage to the X10Pro

Scooter, overheating, and risk of fire. Use of any other charger or cable voids the

manufacturer warranty.

Do not connect or attach the X10Pro Scooter or the battery to a power supply plug or

directly to a car's cigarette lighter.

Do not place the X10Pro Scooter near a fire or leave it out in direct sunlight. Heating the

X10Pro Scooter can break or ignite the battery inside the device.

Do not continue charging the battery if it does not recharge within the specified charging

time. Doing so may cause the battery to become hot, rupture, or ignite.

To preserve natural resources, please recycle or dispose of batteries properly. This

product contains lithium-ion batteries. Local, state, or federal laws may prohibit disposal

of lithium-ion batteries in ordinary trash. Consult your local waste authority for informa-

tion regarding available recycling and/or disposal options.

WARNING

Failure to follow the safety precautions listed below could lead to serious bodily injury

and/or death

Do not attempt to modify, change, or replace your battery.

Do not use your device if the battery begins to emit odor, overheats, or begins to leak.

Do not touch any leaking materials or breathe fumes emitted.

Do not allow children or animals to touch the battery.

The battery contains dangerous substances. Do not open the battery or insert anything

into the battery.

Do not attempt to charge the device if the battery has discharge or emits any substances.

In that case, immediately distance yourself from the battery in case of fire or explosion

WARNING

SEEK IMMEDIATE MEDICAL ASSISTANCE IF YOU ARE EXPOSED TO ANY

SUBSTANCE THAT IS EMITTED FROM THE BATTERY

Charging Your X10Pro Scooter

Ensure that the charging port is clean and dry.

Make sure that there is no dust, debris or dirt inside the port.

Plug the charger into a grounded wall outlet.

Connect the cable with the power supply.

Align and connect the 1-pin charging cable into the charging port of the X10Pro E-Scoot-

er (DO NOT FORCE OR BEND THE CHARGING CABLE AS IT MAY CAUSE THE

PRONGS TO BEND OR BREAK).

The charging indicator light on the charger itself should change to Red, indicating that

your device is now being charged.

When the red indicator light on your charger changes to Green, then your device is fully

charged.

After fully charging your Boss, unplug the charger from your device and from the power

outlet.

CAUTION

Only use the included charging cable and charger to charge your X10Pro Scooter. Using

any unauthorized charger may damage your X10Pro Scooter.