Miele K 3512 SD ed-3 Manual de operação e instalação - Página 28

Procurar online ou descarregar pdf Manual de operação e instalação para Frigorífico Miele K 3512 SD ed-3. Miele K 3512 SD ed-3 32 páginas. With dynamic cooling

Imprimir página

The appliance can be installed into a

kitchen run. To match the height of the

rest of the kitchen the appliance can be

fitted with a suitable top box a.

A ventilation gap of at least 50 mm

depth must be allowed for behind the

appliance for air to circulate.

The cross section of the air outlet must

be at least 300 cm

can circulate without hindrance.

Otherwise the appliance has to work

too hard resulting in an increase in

electricity consumption.

to ensure that air

The air inlet and outlet must not be

covered or blocked in any way.

They should be dusted on a regular

basis.

When built into a kitchen run (max.

depth 580 mm) the appliance can be

installed directly next to a kitchen

furniture housing unit. The appliance

door b will protrude in front of furniture

fronts at the sides by 34 mm and by

51 mm in the middle of the door.

When

of approx. 36 mm is needed on the

hinge side between the wall and the

appliance, so that the door and the

handle have sufficient space for

opening.

When

appliance and the wall, please note the

following:

^ Ensure that the door has sufficient

space for opening fully after the

appliance has been secured.

^ To secure the appliance to adjoining

kitchen furniture use self tapping

screws. The

not exceed

c a gap

is fitted between the

of the screw must