Miele KF 888 iDN-1 Instruções de utilização e de instalação - Página 30

Procurar online ou descarregar pdf Instruções de utilização e de instalação para Frigorífico Miele KF 888 iDN-1. Miele KF 888 iDN-1 48 páginas. Fridge - freezer combination with dynamic cooling

Miele KF 888 iDN-1 Instruções de utilização e de instalação

Cleaning and care

Never use cleaning agents
containing abrasive substances
such as sand, soda, acids or
chemical solvents.
"Non-abrasive" cleaning agents are
also unsuitable as they can cause
matt areas to appear.
Make sure that no water can
penetrate into the electronic unit or
into the light.
Do not let water get into the
drainage channel and drain hole
when cleaning.
Never use steam cleaning
apparatus to clean the appliance.
Pressurised steam could reach the
electrical components and cause a
short circuit.
The data plate located inside the
appliance must not be removed. It
contains information which is
required in the event of a service
call.
Before cleaning
^ Switch the appliance off by pressing
the On/Off switch.
^ Take any food out of the appliance
and store it in a cool place.
^ Take out any removable parts e.g.
shelves for cleaning.
30
Cleaning the interior and
accessories
Use warm water with a little washing up
liquid. Accessories and shelves should
all be hand washed. The butter dish is,
however, dishwasher safe.
^ Clean the appliance at least once a
month.
^ Clean the condensate channel and
drain hole frequently, so that
condensate can drain away
unhindered. Use a straw or similar to
clear the drain if necessary.
^ After cleaning, wipe the interior and
accessories with a damp cloth and
dry with a soft cloth. Leave the doors
open to air the appliance for a short
while.

Ventilation gaps

^ The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner. A build up
of dust will increase the appliance's
energy consumption.

Door seals

Do not use any grease or oil on the
door seals as these will cause the
seals to deteriorate and become
porous over time.
The door seals should be cleaned
regularly with clean water and then
wiped dry with a soft cloth.