Miele GAS COMBISET CS 1011 Instruções de conversão - Página 7

Procurar online ou descarregar pdf Instruções de conversão para Placa de fogão Miele GAS COMBISET CS 1011. Miele GAS COMBISET CS 1011 40 páginas. Gas combiset
Também para Miele GAS COMBISET CS 1011: Instruções de utilização e de instalação (44 páginas), Instruções de utilização e de instalação (48 páginas), Instruções de utilização e de instalação (48 páginas)

Check the intake air

a Lock screw

b Air sleeve

Gap X must measure:

– ½" (13 mm) for natural gas

– ½" (13 mm) for LP (propane) gas

^ To adjust the gap, loosen the lock

screw and slide the air sleeve in or

out as necessary.

^ Tighten the lock screw.

^ Use sealant to secure the jets and

prevent loosening.

^ Reassemble the cooktop in reverse

order.

The flame must not go out on the lowest

setting, or when the control is turned

quickly from a high to a low setting.

On the highest setting the flame must

have a distinctive and visible core.

Converting CS 1011

Changing the needle valves

a Needle valve with small jet

b Needle valve with large jet

^ Using a small screwdriver, unscrew

the needle valves and remove them

with a pair of needle nose pliers.

^ Insert the new valves and screw them

in place.

^ Use sealant to secure the jets and

prevent loosening.

Check all fittings for gas leaks

before reassembling the cooktop.