Miele KM 3010 G Instruções de utilização e de instalação - Página 45
Procurar online ou descarregar pdf Instruções de utilização e de instalação para Placa de fogão Miele KM 3010 G. Miele KM 3010 G 48 páginas.
Imprimir página
Electrical connection
ATTENTION:
During installation, maintenance and
repair work, the appliance must be
disconnected from the electricity
supply. It is only completely isolated
from the electricity supply if the plug
fuses have been fully unscrewed
(where applicable), the main circuit
breaker has been tripped or the
power cable has been unplugged
from the wall outlet.
Do not cut off the plug on the power
cord. If the plug does not fit in the
outlet, have an electrician install an
appropriate outlet.
The socket must be easily accessible
after the appliance has been in-
stalled.
Work by unqualified persons can
cause considerable danger to users.
Miele cannot be held liable for any
damage arising as a result of such
work.
Installation, repair and maintenance
work should only be performed by a
Miele authorized service technician.
To avoid damaging the appliance,
the information (voltage and fre-
quency) on the data plate must cor-
respond to the building's power sup-
ply.
Compare these informations before
connecting the appliance. When in
doubt, consult a qualified electrician.
The plug must be inserted into a suit-
able outlet that has been installed
and grounded in compliance with all
applicable local regulations.
To guarantee the electrical safety of
this appliance, continuity must exist
between the appliance and an effec-
tive grounding system. It is impera-
tive that this basic safety require-
ment be met. If there is any doubt,
have the electrical system of the
house checked by a qualified electri-
cian.
Installation, repair and maintenance
work should only be performed by a
Miele-authorized qualified electrician
in compliance with local regulations
and the ANSI National Electrical
Code / NFPA 70 in the United States
or the Canadian Electric Code, CSA
C22.1-02. in Canada.
Installation
45