Allnet ALL8808POE Manual - Página 13
Procurar online ou descarregar pdf Manual para Interruptor Allnet ALL8808POE. Allnet ALL8808POE 18 páginas. 8 port gigabit poe+
Imprimir página
Rack-mount Installation
Rack mounting facilitate to an orderly installation when
series of networking devices being installed. The
switch is supplied with rack mounting brackets and
screws for rack mounting the unit.
Procedures to Rack-Mount the Switch in the rack:
1.
Disconnect all the cables from the switch before
continuing.
2.
Place the unit the right way up on a hard, flat
surface with the front facing you.
3.
Locate a mounting bracket over the mounting
holes on one side of the unit.
4.
Insert the screws and fully tighten with a suitable
screwdriver.
5.
Repeat the two previous steps for the other side
of the unit.
6.
Insert the unit into the rack and secure with
suitable screws (not provided).
9