Miele KM 360 G Manual de instruções de instalação - Página 8

Procurar online ou descarregar pdf Manual de instruções de instalação para Placa de fogão Miele KM 360 G. Miele KM 360 G 16 páginas. Gas-hobs
Também para Miele KM 360 G: Manual de Instruções (20 páginas), Dimensões do produto (1 páginas), Especificações (7 páginas), Manual de Instruções (20 páginas), Manual de Instruções (20 páginas), Manual de Instruções (20 páginas), Manual de Instruções (28 páginas), Manual de instruções de instalação (24 páginas), Manual de instruções de instalação (28 páginas), Manual de instruções de instalação (16 páginas), Manual de instruções de instalação (28 páginas)

Imprimir página
Miele KM 360 G Manual de instruções de instalação

Electrical connection

This appliance must be electrically
grounded. All electrical work should
be performed by a qualified
electrician in accordance with local
or national codes and the:
-
National Electrical Code
ANSI / NFPA No. 70
for the USA
or
-
Canadian Electrical Code Part I
for Canada
(CSA Standard C 22.2
No. O-M91).
,
WARNING
Disconnect the appliance from the
main power supply before
installation or service. To reduce the
risk of electric shock, make sure that
the appliance is properly grounded
after installation.
Power supply
The automatic ignition requires that the
cooktop be connected to a 120 VAC,
60 Hz power supply. The supply line
should be protected by a 15 A breaker.
Actual power consumption (during
ignition only) is 25 W.
This appliance is equipped with a 4 ft.
(1.2 m) long power cord that is ready
for connection to the appropriate outlet.
Please place the power outlet so that it
is accessible after the appliance has
been installed in the countertop.
8
This appliance is equipped with a
three-prong grounding plug to
prevent shock hazards. It should be
plugged directly into a properly
grounded outlet. Do not cut or
remove the grounding prong from
the plug. If the plug does not fit the
outlet, have a proper outlet installed
by a licensed electrician.
To guarantee the electrical safety of
this appliance, continuity must exist
between the appliance and an
effective grounding system. It is
imperative that this basic safety
requirement be met. If there is any
doubt, have the electrical system of
the house checked by a qualified
electrician.
The manufacturer cannot be held
responsible for damages caused by
the lack, or inadequacy, of an
effective grounding system.
Note to the installer
Please leave these instructions with the
consumer or the appliance.