Miele KM 361 G Manual de instruções de instalação - Página 13

Procurar online ou descarregar pdf Manual de instruções de instalação para Placa de fogão Miele KM 361 G. Miele KM 361 G 28 páginas. Gas-hobs
Também para Miele KM 361 G: Manual de Instruções (28 páginas), Manual de instruções de instalação (24 páginas), Manual de instruções de instalação (28 páginas), Manual de instruções de instalação (28 páginas)

Preparing the worktop

 Create the worktop cut-out as shown

in "Building-in dimensions".

Remember to maintain the minimum

safety distances (see "Safety

distances").

 Seal the cut surfaces with a suitable

heat-resistant sealant to avoid

swelling caused by moisture. The

sealant must be temperature-

resistant.

Make sure the sealant does not

come into contact with the top

surface of the worktop.

The sealing strip ensures that the

cooktop will sit securely in the cut-out

without slipping. Any gap between the

frame and worktop will become

smaller over time.

Installing the cooktop

 Feed the mains connection cable

down through the worktop cut-out.

 Place the cooktop centrally in the

cut-out. When doing this make sure

that the seal of the appliance sits

flush with the worktop on all sides.

This is important to ensure an

effective seal all round.

If the seal does not meet the worktop

correctly on the corners, the corner

radii (≤ R4) can be carefully scribed to

suit.

Do not use any additional sealant

(e.g. silicone).

 Connect the cooktop to the mains

electricity supply.

 Connect the cooktop to the gas

supply (see "Gas connection").

Installation