Chroma CHINHLCTRLBOX924 Manual de início rápido - Página 2
Procurar online ou descarregar pdf Manual de início rápido para Equipamento de iluminação Chroma CHINHLCTRLBOX924. Chroma CHINHLCTRLBOX924 4 páginas. External control box
Imprimir página
1. Overview
The Inspire™ External Control Box, is the addressing control interface for the remote control of
the Inspire™ Terminal Strip fixture through the ANSI E1.11 USITT DMX 512-A protocol.
2. Safety
This product is for professional use only. It is NOT intended for domestic or
outdoor use.
Caution
3. Cabling
Figure 1: Sample System Diagram
Figure 2: Power & Data Connections
To connect the wiring for power and control data:
• Remove the cover plate and the plastic plugs covering the holes.
• Connect the wiring for the AC and Emergency Power Input through the hole, into the Terminal
Block Plug and plug into the Terminal Block Header inside the External Control Box (Figure 4).
• Connect the wiring for the DMX Data Outputs – Port 1, 2 and 3 through the holes, into the
Terminal Block Plug and plug into the Terminal Block Header inside the External Control Box
(Figure 3).
TM
Inspire
External Control Box QSG V2.0
Maximum DMX cable
length from Data Out
1/2/3 to the 1st fixture
must not exceed
500'/152m.
QSG P/N: 632-0708