360VRFit M2ME IoT Sensor Manual de instruções - Página 2

Procurar online ou descarregar pdf Manual de instruções para Eletrónica de fitness 360VRFit M2ME IoT Sensor. 360VRFit M2ME IoT Sensor 2 páginas.

Imprimir página
Key Features (IoT Sensor)
·
Attachable Linear and Rotational Motion Counting
IoT Sensor.
·
Enable smartphone to be used with ordinary
fitness equipment with VRFit service for 360 virtual
exercise experience.
·
Support indoor bike, rowing machine, elliptical,
boxing.
Notes
Do not disassemble the sensor.
Be careful not to get water inside.
Do not attach the sensor to a location where direct
force is applied.
IoT sensor may not operate normally near devices
that emit electromagnetic waves
( e.g. wireless APs, Bluetooth devices, or
microwave ovens).
Items are included
M2Me IoT Sensor
Manual
Velcro tape
O-ring
M2Me IoT Sensor
2
Charging port
1
Power switch
1.
Power switch
User can turn the power ON/OFF.
(Use the ON/OFF switch when you need to reset the device,
Keep it in the ON state normally. If a smartphone is not connected,
Sleep mode is activated, and the battery is barely consumed.)
2.
Charging port
It can be charged using a USB Micro 5-pin cable.
Button1 &
LED1
3.
LED function
LED1 (green): lights up when the battery is sufficient.
LED2 (red): lights up when the battery is low.
4. Button function
Button 1 or 2 is pressed : Check whether the device is turned on
by LED.
Button 1 is pressed for 3 seconds : Bluetooth connection is
disconnected.
Button 1 and button 2 are pressed simultaneously for 6 seconds :
Initialize the device to the factory state.
Getting started with VRFit
1.
Attach the loT sensor to fitness equipment.
Install it on moving part (e.g. pedal for a bike) with velcro tape.
2.
Use your smartphone to search for VRFit in the
Play Store and download it.
Application List (Android)
Exercise while watching 360 VR video.
360VRFit Cycle1
(The faster movement in the real world,
the faster you go in 360 VR.)
Users can compete with an avatar, which
360VRFit Cycle2
is based on the real record of other people.
Turns the rowing machine into a 360 VR device.
360VRFit Rowing
Record competition on the lake.
With 2 IoT sensors, you can exercise boxing while
360VRFit Boxing
listening to various music.(iOS & Android)
Exercise while watching video lectures on YouTube.
VRFit Cycle Pop
Provides graphs like RPM and Watt.
Exercise while watching lake video on YouTube.
VRFit Rowing Pop
Provides graphs like stroke and SPM.
3.
Run an app and connect the sensor.
Button2 &
LED2
4.
Start an exercise by pressing the
"Exercise start" button.
Supported software
Applications supporting FTMS cycle protocol :
Zwift, Bkool fitness, Fulgaz - (iOS & Android)
Kinomap - (iOS)
Using VRFit Z Assistant (Android) app You can change the
watt output level.
Rhythm riding
(Ride with a beat of
the music, exercise
with optimal RPM.)