ALLNIC AUDIO D-10000 Manual do Proprietário - Página 11

Procurar online ou descarregar pdf Manual do Proprietário para Conversor de multimédia ALLNIC AUDIO D-10000. ALLNIC AUDIO D-10000 16 páginas. Digital to analog converter

Imprimir página

a software or hardware up-sampler that is not of sufficiently high quality. It is recommended that, if

possible, the source software or device is used to down-sample such signals to improve the sound

quality.

Please also note that while the D-10000 OTL/OCL filters incoming low quality SPDIF interface signals,

some source devices in the market do not meet S/PDIF standard or are otherwise of insufficient

quality and can be noisy.

The button labelled "UPSAMPLE" is used to select the desired up-sampling rate. Repeated presses of

the UPSAMPLE button move the unit through the available up-sampling rates as indicated on the front

panel.

NOTE: The user cannot control the up-sample rate for conversion to DSD; the D-10000 OTL/OCL's

conversion to DSD and PCM "UPSAMPLE" functions are discrete processes.

Drivers are not required for Mac/Linux operating systems. The Thesycon driver is compatible for

Windows applications and is available on-line. It is currently planned to have a Windows compatible

driver that will specifically recognize the D-10000 OTL/OCL DAC available for download from the

Audiomentors and Allnic Audio websites.

Of course, BE CAREFUL about differences in gain between your sources. Generally, DACs and digital

disc players (and tuners) will have greater gain than phono-stages. That means the volume setting for

listening to your turntable might be too high for listening to a digital source through the D-10000.

When you are finished listening, turn off your power amplifier(s); then turn off your preamplifier and

then turn off your sources last, including the D-10000 OTL/OCL by pressing in the bottom of the on/off

rocker switch, located on the left side panel near the front of the unit.

NOTE: While the D-10000 OTL/OCL DAC is run in and tested at the factory, users have reported that

the sound improves steadily through the first two to three hundred hours of use.

In the case of any failure, please contact your Allnic dealer for assistance.

THE REMOTE CONTROL

The remote control allows remote operation of all the functions on the front panel of the D-10000

OTL/OCL. It does not support the on/off function, however. The remote control provided is a standard

Apple product. All functions controllable by the remote are manipulated by using the large button at

the top of the remote control, which is surrounded by a black ring with a white dot at its top and

bottom and left and right sides.

The DAC functions are selected as follows (See Figure 3, below):

Pressing the upper part of the black main button ring selects the various inputs from right to

•

left on the face of the unit