Burkert 0290 Manual de Instruções - Página 9
Procurar online ou descarregar pdf Manual de Instruções para Unidade de controlo Burkert 0290. Burkert 0290 15 páginas. 2/2-way solenoid valve
Também para Burkert 0290: Manual de Instruções (15 páginas)
Imprimir página
5
INSTALLATION
5.1 Safety instructions
DANGER!
Risk of injury from high pressure in the equipment.
▶ Before loosening the pipes and valves, turn off the pressure and
vent the pipes.
Risk of injury due to electrical shock.
▶ Before reaching into the device or the equipment, switch off the
power supply and secure to prevent reactivation.
▶ Observe applicable accident prevention and safety regulations for
electrical equipment.
WARNING!
Risk of injury from improper installation.
▶ Installation may be carried out by authorized technicians only and
with the appropriate tools.
Risk of injury from unintentional activation of the system and an
uncontrolled restart.
▶ Secure system from unintentional activation.
▶ Following assembly, ensure a controlled restart.
5.2 Before installation
Installation position: Installation can be in any position.
Preferably: Actuator upright.
→
Prior to installation check pipelines for dirt and, if required, clean.
Dirt filter: To ensure that the solenoid valve
functions reliably, a dirt filter (≤ 400 µm) must
be installed in front of the valve inlet.
NOTE!
For devices with approval according to the European Gas Appli-
ances Directive it is essential to install the filter.
5.3 Installation
Sealing material must not get into the device.
→
Hold the device with a suitable tool (open-end wrench) on the
body and screw into the pipeline.
english
9