Chroma Inspire Manual do utilizador - Página 19
Procurar online ou descarregar pdf Manual do utilizador para Luminária Chroma Inspire. Chroma Inspire 20 páginas. Terminal strip
Também para Chroma Inspire: Manual de início rápido (3 páginas)
Imprimir página6.4 Slide the Trim Ring and Angle Support assembly down onto the fixture
Align the 2 empty slots of the trim ring to
•
match the threads of the 2 bracket hooks
on the fixture.
Slide the trim ring down onto the fixture:
•
Match the 2 empty trim ring slots to the
•
bracket hook threads.
Match and insert the 2 loosely fastened
•
screw nuts into the slots between the fins.
6.5 Put the Cap back
Put the cap back and fasten with 2 x M3
•
FH screws (5.5 in-lb torque).
6.6 Fasten the Trim Ring to the 2 Bracket Hooks on the fixture
Adjust the trim height then fasten with the
•
4 flanged button socket screws and
washers onto the 2 Bracket Hooks on both
sides of the fixture.
Note:
Minimum torque for the ¼-20 in. flanged
button socket screw is 48 in-lb.
6.7 Tighten the screws on the Angle Supports
Tighten the loosely fastened flanged
•
button socket screws on each of the angle
supports.
Note:
Minimum suggested torque for the ¼-20 in.
flanged button socket screw is 48 in-lb.
6.8 Install the fixture onto the ceiling
Inspire User Manual
Screw & washers
Slot for Bracket Hook
Cap
www.chroma-q.com
18
Slot for Nut
V1.4 May 2014