Allo.com 4aCP1eL Manual de instalação - Página 12

Procurar online ou descarregar pdf Manual de instalação para Acessórios para computador Allo.com 4aCP1eL. Allo.com 4aCP1eL 14 páginas. Digital card

Allo E1/T1 PRI Card Quick Installation Guide
# dahdi_genconf –vvvvv
By running "dahdi_genconf", it will generate /etc/dahdi/system.conf and etc/asterisk/dahdi-
channels.conf automatically. Check whether the generated files information agrees with your
hardware setup, if not, you should modify to your specific requirements.
Dahdi_genconf-vvv channels configure with Asterisk
Do not forget to include"dahdi-channels.conf" in "chan_dahdi.conf" to configure Dahdi
channels with asterisk, if not, run command:
# echo "#include dahdi-channels.conf" >> /etc/asterisk/chan_dahdi.conf
Execute the following command:
# dahdi_cfg–vvvvv
This command is used for the entire spans channels configuration.
To check dahdi hardware devices run the command "dahdi_hardware" from the command
prompt a sample output is shown below.
After compiling and installing DAHDI and Asterisk, load the Dahdi driver by running:
Check alloPL4xxp show with + symbol "+ shows module loaded "
Start the Asterisk by executing
# asterisk -gvvvvvvvvvc
Make sure that PRI spans are up and active, before making calls. Here is the command to check
the PRI span status
CLI>pri show spans
www.allo.com
Version 2.1
12