Dialogic D4PCIU Instalação rápida - Página 2

Procurar online ou descarregar pdf Instalação rápida para Hardware informático Dialogic D4PCIU. Dialogic D4PCIU 2 páginas. Quick install card for pci universal
Também para Dialogic D4PCIU: Instalação rápida (2 páginas)

Imprimir página

Installing the Hardware

NOTE: If you are adding Dialogic

hardware to an existing

system, you do not need to uninstall existing system software.

1. Working with your computer at a static-safe work area,

switch off the power and disconnect all power cords

from the electrical outlets.

2. Remove the computer cover.

3. Select an empty PCI expansion bus slot and remove the

slot's retaining screw and access cover plate.

4. Insert the edge connector of the board into the bus slot.

Press firmly until the board is securely seated.

Installing the Universal PCI Board

Remove

Cover

Plate

Computer

Chassis

PCI Slot

ISA Slot

5. Replace and tighten the retaining screw to secure the

board firmly in the chassis slot.

6. Replace the computer cover when finished and

reconnect the power cords.

7. Turn the power to the chassis ON.

CAUTION: If your BIOS is set to use Plug and Play

technology and there are ISA boards in your system, an

IRQ conflict can be created if a PCI board is assigned the

same IRQ as an ISA board. This could cause the machine

to stop responding. You can prevent this by entering the

BIOS and reserving the appropriate IRQs (those used by

your ISA boards) for ISA use only.

Connecting External Cables

Each RJ-11 jack on the rear bracket of this board supports a

single channel. Use RJ-11 connectors and telephone cable to

connect each channel jack to a PBX station port or to the

Public Telephone Network Central Office (CO).

NOTE: A standard telephone will not function when directly

connected to the board.

Connecting Cables to J1-J4

Pinouts for J1–J4

on Bracket

UNUSED

Ring

Tip

UNUSED

After Installing Hardware

After installing the hardware, run the Dialogic

Manager (DCM) as described in the installation instructions

included with the Dialogic

your system.

PCI

Board

For technical specifications and product information go to:

http://www.dialogic.com/products.htm.

and Return Information

For specific warranty information for this board, refer to the

Warranty section of the Products page, located at this URL:

http://www.dialogic.com/warranties/.

Contacting Technical Support

Dialogic provides technical support for its products through a

network of value added distributors who are trained to answer

technical questions on installing and configuring Dialogic

products. If you are unsure how to contact your support

channel, please call Dialogic n the United States at 973-967-

6600 (9am-5pm EST) and we will assist in obtaining the

appropriate support channel. Outside the United States please

refer to

http://www.dialogic.com/support/contact

local contact information.

Dialogic also provides direct support via Dialogic

Services agreements. For more details of direct support from

Dialogic please refer to:

http://www.dialogic.com/support/DialogicPro.

To return a board for warranty repair or any other returns,

please refer to the following:

http://www.dialogic.com/support/hwfaults.

PBX or Public Telephone

Network Cable Connector

Pin 1

NOTE:

J1 is Channel 1

J2 is Channel 2

J3 is Channel 3

J4 is Channel 4

Configuration

System Software to configure

Warranty

Warranty Period

to obtain

Pro™

Returning a Product

Sales Assistance

If you have a sales question, please contact your

local Sales Representative or the Regional Sales Office

for your area. Address, telephone and fax numbers, are

available at the Dialogic website located at:

http://www.dialogic.com/contact.htm

To purchase Dialogic

products, please refer to the following

website to locate the appropriate supplier:

http://www.dialogic.com/purchase.htm

All contents of this document are furnished for informational use only and are

subject to change without notice and do not represent a commitment on the part

of Dialogic Corporation or its subsidiaries ("Dialogic"). Reasonable effort is

made to ensure the accuracy of the information contained in the document.

However, Dialogic does not warrant the accuracy of this information and

cannot accept responsibility for errors, inaccuracies or omissions that may be

contained in this document.

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION

WITH DIALOGIC

PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED,

BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY

RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED

IN A SIGNED AGREEMENT BETWEEN YOU AND DIALOGIC,

DIALOGIC ASSUMES NO LIABILITY WHATSOEVER, AND DIALOGIC

DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO

SALE AND/OR USE OF DIALOGIC PRODUCTS INCLUDING LIABILITY

OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR

PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY

INTELLECTUAL PROPERTY RIGHT OF A THIRD PARTY.

Dialogic products are not intended for use in medical, life saving, life

sustaining, critical control or safety systems, or in nuclear facility applications.

It is possible that the use or implementation of any one of the concepts,

applications, or ideas described in this document, in marketing collateral

produced by or on web pages maintained by Dialogic may infringe one or more

patents or other intellectual property rights owned by third parties. Dialogic

does not provide any intellectual property licenses with the sale of Dialogic

products other than a license to use such product in accordance with

intellectual property owned or validly licensed by Dialogic and no such

licenses are provided except pursuant to a signed agreement with Dialogic.

More detailed information about such intellectual property is available from

Dialogic's legal department at 9800 Cavendish Blvd., 5

Quebec, Canada H4M 2V9. Dialogic encourages all users of its products to

procure all necessary intellectual property licenses required to implement

any concepts or applications and does not condone or encourage any

intellectual property infringement and disclaims any responsibility related

thereto. These intellectual property licenses may differ from country to

country and it is the responsibility of those who develop the concepts or

applications to be aware of and comply with different national license

requirements.

Dialogic, Diva, Eicon, Eicon Networks, Eiconcard and SIPcontrol, among

others, are either registered trademarks or trademarks of Dialogic. Dialogic's

trademarks may be used publicly only with permission from Dialogic. Such

permission may only be granted by Dialogic's legal department at 9800

Cavendish Blvd., 5th Floor, Montreal, Quebec, Canada H4M 2V9. Any

authorized use of Dialogic's trademarks will be subject to full respect of the

trademark guidelines published by Dialogic from time to time and any use of

Dialogic's trademarks requires proper acknowledgement. The names of actual

companies and products mentioned herein are the trademarks of their

respective owners.

Floor, Montreal,