Dialogic DM/N Series Cartão de instalação rápida - Página 2

Procurar online ou descarregar pdf Cartão de instalação rápida para Placa PCI Dialogic DM/N Series. Dialogic DM/N Series 2 páginas. Digital telephony interface boards

Imprimir página

8. Select a new PCI slot and repeat steps 3–7 for each board

you are installing.

Installing a PCI Board

Remove

Cover

Plate

Computer

Chassis

PCI Slot

ISA Slot

9. Use the CT Bus cable to connect the board(s) you are

installing to other boards in the system.

Installing the CT Bus Cable

Colored

Stripe

(Pin 1)

NOTE:

Your CT Bus cable may

have a different number

of connectors (drops).

NOTE: Your system may include both CT Bus and

SCbus boards. To connect both board types, you must

install a CT Bus/SCbus Adapter on one of the CT Bus

boards in the system. See the CT Bus/SCbus Adapter

Quick Install Card for installation details about the

Adapter and the bus cables. Contact your Sales

Representative to order an Adapter.

10. Install CT Bus Termination Jumpers only on boards

located at each end of the CT Bus cable. See Physical

Description section.

11. Replace the computer cover when finished and reconnect

the power cords.

12. Turn the power to the chassis ON.

CAUTION: If your BIOS is set to use Plug and Play

technology and there are ISA boards in your system, an

IRQ conflict can be created if a PCI board is assigned the

same IRQ as an ISA board. This could cause the machine

to stop responding. You can prevent this by entering the

BIOS and reserving the appropriate IRQs (those used by

your ISA boards) for ISA use only.

Connecting to the RJ–48C Jacks

Pinouts for the RJ–48C

Jacks on Bracket

PCI

Board

RCV_RING

RCV_TIP

CHASSIS GROUND

XMIT_RING

XMIT_TIP

CHASSIS GROUND

After Installing Hardware

After installing the hardware, proceed with the system

software installation as described in the Dialogic

Software documentation (if applicable).

For technical specifications and product information go to:

http://www.dialogic.com/products.htm.

CT Bus

Warranty and Return

Cable

For specific warranty information for this board, refer to the

Warranty section of the Products page, located at this URL:

http://www.dialogic.com/warranties/.

Contacting Technical Support

Dialogic provides technical support for its products through a

network of value added distributors who are trained to answer

technical questions on installing and configuring Dialogic

products. If you are unsure how to contact your support

channel, please call Dialogic in the United States at 973-967-

6600 (9am-5pm EST)

and we will assist in obtaining the appropriate support

channel. Outside the United States please refer to

http://www.dialogic.com/support/contact to obtain

local contact information.

Dialogic also provides direct support via Dialogic

Services agreements. For more details of direct support from

Dialogic please refer to:

http://www.dialogic.com/support/DialogicPro.

To return a board for warranty repair or any other returns,

please refer to the following:

http://www.dialogic.com/support/hwfaults. To return a board

for warranty repair, please refer to the following:

http://www.dialogic.com/support/hwfaults. For all other

Network Interface

Cable Connector

Pin 1

System

Information

Warranty Period

Pro™

Returning a Product

returns, contact your vendor or Dialogic Customer Support

(for more information, see

http://www.dialogic.com/support/contact/ ).

Sales Assistance

If you have a sales question, please contact your

local Sales Representative or the Regional Sales Office

for your area. Address, telephone and fax numbers, are

available at the Dialogic website located at:

http://www.dialogic.com/contact.htm.

To purchase Dialogic

products, please refer to the following

website to locate the appropriate supplier.

http://www.dialogic.com/purchase.htm.

All contents of this document are furnished for informational use only and are subject to

change without notice and do not represent a commitment on the part of Dialogic

Corporation or its subsidiaries ("Dialogic"). Reasonable effort is made to ensure the accuracy

of the information contained in the document. However, Dialogic does not warrant the

accuracy of this information and cannot accept responsibility for errors, inaccuracies or

omissions that may be contained in this document.

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH

DIALOGIC

PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR

OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS

DOCUMENT. EXCEPT AS PROVIDED IN A SIGNED AGREEMENT BETWEEN YOU

AND DIALOGIC, DIALOGIC ASSUMES NO LIABILITY WHATSOEVER, AND

DIALOGIC DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO

SALE AND/OR USE OF DIALOGIC PRODUCTS INCLUDING LIABILITY OR

WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE,

MERCHANTABILITY, OR INFRINGEMENT OF ANY INTELLECTUAL PROPERTY

RIGHT OF A THIRD PARTY.

Dialogic products are not intended for use in medical, life saving, life sustaining, critical

control or safety systems, or in nuclear facility applications.

It is possible that the use or implementation of any one of the concepts, applications, or ideas

described in this document, in marketing collateral produced by or on web pages maintained

by Dialogic may infringe one or more patents or other intellectual property rights owned by

third parties. Dialogic does not provide any intellectual property licenses with the sale of

Dialogic products other than a license to use such product in accordance with intellectual

property owned or validly licensed by Dialogic and no such licenses are provided except

pursuant to a signed agreement with Dialogic. More detailed information about such

intellectual property is available from Dialogic's legal department at 9800 Cavendish Blvd.,

Floor, Montreal, Quebec, Canada H4M 2V9. Dialogic encourages all users of its

products to procure all necessary intellectual property licenses required to implement

any concepts or applications and does not condone or encourage any intellectual

property infringement and disclaims any responsibility related thereto. These

intellectual property licenses may differ from country to country and it is the

responsibility of those who develop the concepts or applications to be aware of and

comply with different national license requirements.

Dialogic, Diva, Eicon, Eicon Networks, Eiconcard, Dialogic Pro and SIPcontrol, among

others, are either registered trademarks or trademarks of Dialogic. Dialogic's trademarks may

be used publicly only with permission from Dialogic. Such permission may only be granted

by Dialogic's legal department at 9800 Cavendish Blvd., 5th Floor, Montreal, Quebec,

Canada H4M 2V9. Any authorized use of Dialogic's trademarks will be subject to full respect

of the trademark guidelines published by Dialogic from time to time and any use of

Dialogic's trademarks requires proper acknowledgement. The names of actual companies

and products mentioned herein are the trademarks of their respective owners.