DiamaPro Systems SVX3-M Manual do Proprietário - Página 4
Procurar online ou descarregar pdf Manual do Proprietário para Máquina de chão DiamaPro Systems SVX3-M. DiamaPro Systems SVX3-M 11 páginas. Industrial vacuum
Imprimir página
12. USING THE VACUUM CLEANER
Before switching ON the vacuum be sure the
container is empty
1
I
0
I - Motor switch ON
O - Switch OFF
13. FILTER REPLACEMENT
PRIMARY FILTER REPLACEMENT
1. Disconnect and lift the head. (A)
2. Remove the filter (B)
3. Replace the filter with a proper one for
the vacuum cleaner in use
4. Insert the new filter
5. Hang up the head (A)
C
SECONDARY FILTER REPLACEMENT
D
1. Remove the rubber sleeve (C)
E
2. If necessary, close the filter with a cap (D)
3. Remove the three screws (E)
4. Remove the filter (F)
F
5. Replace the filter with a proper one for the
vacuum cleaner in use
6. Insert the new filter (F)
7. Fix the filter on the chamber with the 3 screws
8. Connect the sleeve
1
I
I
0
0
A
B
14. FILTER CLEANING DEVICE
AND SUCTION MODE
To make cleaning effective the vacuum cleaner must
be in operation
MANUAL FILTER CLEANING
Close the suction nozzle (A) and act on the lever (B) to clean the filter, with
a fast movement. If necessary, repeat the operation.
15. TROUBLESHOOTING
You can thus solve any problem that may occur.
Motors do not start.
u No electrical voltage.
u Check cables, plugs and socket.
Suction capacity decreases slowly.
u Filter, nozzle, suction hose or suction pipe may be blocked.
u Check, clean accessories. Clean filter.
Dust comes out during the vacuuming.
u Filter has not been fastened correctly or is defective.
u Check to see if filter is sitting properly; replace if required.
B
A