Miller 300618003 Manual do Proprietário - Página 24

Procurar online ou descarregar pdf Manual do Proprietário para Sistema de soldadura Miller 300618003. Miller 300618003 44 páginas.

Imprimir página

6-4. Program Push Button

6-5. Upper Display

To set the correct voltage range for a par-

ticular power source, see Section 5-6 for

power source selection menu, or Section

6-10 for V-Min And V-Max adjustments.

Upper Display

The upper display shows voltage or time. The

unit displays both preset and actual arc vol-

tage. When the unit is in a welding state, actual

arc voltage is displayed. The upper display

shows welding sequence time when the Time

LED is illuminated.

Upper Display Push Button

Press and hold button to adjust or display weld

time. Release button to display voltage.

OM-1500-9 Page 20

Upper Display Push Button LED

The upper display push button LED illumi-

nates to indicate that information displayed

can be changed by the Adjust control.

Volts LED

Time LED

The LEDs below the display illuminate to indi-

cate which value is being shown.

At any time while welding, the unit permits the

adjustment of the weld sequence voltage and

overrides the display of actual arc voltage.

• If the unit is displaying a welding sequence

that can be timed, the welding time display

mode is entered by pressing the upper dis-

Program Display

The number of the active program

is displayed.

Program Push Button

Press button to activate program

select feature. To change the pro-

gram number, press the Program

push button and rotate the Adjust

control.

Program Push Button LED

The LED lights to indicate the Pro-

gram push button is active.

play push button repeatedly until welding

time is the active parameter in the upper dis-

play. At idle, the upper display toggles be-

tween showing weld voltage or weld time,

with subsequent presses of the upper dis-

play push button.

• The unit defaults to displaying welding volt-

age when a welding sequence display

mode is first entered.

• If the weld sequence has a time set (as in

spot time), after the weld program is com-

pleted, ERR TRG 1 will be displayed to indi-

cate the weld program is complete. Release

trigger to clear error.