aquanique WP1300UV Manual - Página 4

Procurar online ou descarregar pdf Manual para Bomba de água aquanique WP1300UV. aquanique WP1300UV 8 páginas. Submersible waterfall pump with uv 1300 gallons per hour

Imprimir página

2. Untie the drawstring on the pump barrier bag and then remove the

pump from the pump barrier bag. Clean the pump barrier bag then

place the pump back inside the pump barrier bag and test the pump.

Fig. 8

NOTE: If the pump performance is still unsatisfactory, unplug the

pump and proceed to step 3.

3. Remove the front cover from the pump. Fig. 9

4. Remove the impeller cover to expose the impeller assembly.

Remove the impeller assembly by gently pulling on the impeller

blades. Use a soft cloth or brush to clean the impeller assembly

and inside of the impeller housing. Fig. 10

5. Remove the locking screw, which is located on the bottom of the

pump. Fig. 11

6. Remove rear cover by gently pressing on the sides and pulling it

away from the pump. Fig. 12

Before returning to your retailer, call our customer service department at

1-888-314-2588, 8 a.m.-6 p.m., EST, Monday-Friday.

Untie

drawsting

Fig. 8

Fig. 9

Fig. 10

Fig. 11

Press

here