3B Medical RESmart Series Manual
Procurar online ou descarregar pdf Manual para Equipamento médico 3B Medical RESmart Series. 3B Medical RESmart Series 2 páginas. Single battery connection
Imprimir página3B M
Luna & RESmart Series: Single Battery C
edical
REQUIRED COMPONENTS
Freedom
TM
CPAP Battery Kit
150W Sine Wave Power Inverter (inverter)
CONNECTION INSTRUCTIONS
Plug the DC input cord into the DC OUT jack of the battery.
Plug the inverter into the DC input cord.
Plug the AC power cord of the PAP device into the inverter.
Turn the PAP device on and it should begin functioning.
The digital display screen will show the charge level of the battery. You may press the charge level indicator
button to illuminate this screen. It will stay illuminated for a few seconds at a time.
When not in use disconnect all devices from the battery thus allowing the battery to completely shut down.
Image shows connection
to a 3B Medical Luna device.
The inverter can also be used to charge the battery in a vehicle (vehicle does not need to be running) and to power/charge
other small electronic devices with the b attery. The inverter is not proprietary to the Freedom
used with other external batteries.
TM
OPTIONAL FREEDOM
Auto Charge DC Cable {BPS DC.CABLE}: Used to charge the battery in a vehicle (vehicle must be running).
SunPower 40W Solar Panel {BPS SP40}: Used to charge the battery using the power of the sun.
DC OUT JACK
CPAP BATTERY CHARGING ACCESSORIES
BATTERY POWER SOLUTIONS
PAP AC POWER CORD
150W SINE WAVE
POWER INVERTER
DC INPUT CORD
TM
CPAP Battery and can be
onnection
Page 1 of 2
June 2016