Miller AMD-4GH Manual do Proprietário - Página 20

Procurar online ou descarregar pdf Manual do Proprietário para Sistema de soldadura Miller AMD-4GH. Miller AMD-4GH 28 páginas.
Também para Miller AMD-4GH: Manual do Proprietário (24 páginas)

Imprimir página
Miller AMD-4GH Manual do Proprietário

5-3. Troubleshooting

Trouble
Electrode wire feeding stops or feeds er-
ratically during welding.
Motor runs slowly.
Motor runs at full speed regardless of
wire speed setting.
Notes
OM-179082 Page 16
Readjust hub tension and drive roll pressure.
Change to correct size drive roll.
Clean or replace dirty or worn drive roll.
Incorrect size or worn wire guides.
Replace contact tip or liner. See gun Owner's Manual.
Remove weld spatter or foreign matter from around gun nozzle opening.
Check and secure motor plug connection.
Have Factory Authorized Service Agent check drive motor.
Reduce load.
Check for correct input voltage.
Have Factory Authorized Service Agent check digital wire drive motor Tachometer board and encoder
disc.
Remedy