Miller EnPak A60GBHW Manual de início rápido - Página 2
Procurar online ou descarregar pdf Manual de início rápido para Sistema de soldadura Miller EnPak A60GBHW. Miller EnPak A60GBHW 4 páginas.
Imprimir página
Home Screen
Top Status Bar
1
Status Bar Text
Displays user feedback and any active alerts
and errors.
2
Glow Plug Icon
Lit when the glow plugs are activated before
cranking.
3
Auto Start/Stop Icon
Lit when Auto Start/Stop is enabled.
Gauges
4
RPM Gauge
Displays engine RPM. When unit is stopped,
"OFF" is highlighted. When unit is Auto
Stopped, "READY" is highlighted.
5
Air Compressor PSI Gauge
The MIN and MAX air compressor PSI
settings are indicated by tick marks.
6
Chassis Power Gauge
When Chassis Power is not providing output,
gauge shows chassis battery voltage.
If unit is not running, Auto Start/Stop is
enabled, and chassis battery voltage drops
below 12.3 volts, the unit will Auto Start.
When Chassis Power is providing output,
gauge shows chassis power amperage
output.
Settings Menu
1
System Settings
Select to change unit operation parameters.
2
Maintenance Menu
Select to check, change, or reset the
maintenance interval schedule.
3
System Info
Select to check and update software, check
and download summary file, and restore unit
to factory defaults.
4
Troubleshooting
Displays live unit data for troubleshooting
purposes.
1
4
7
10
7
Engine Load Gauge
Displays current load on the engine. When
gauge reads near or above max, the engine
power is maxed out.
8
Hydraulics Gauge
Displays hydraulic output (hydraulic
units only).
9
Battery Charge Gauge
Displays battery charge current output.
Bottom of gauge shows whether the unit is
in 12V or 24V mode.
When output is above 100A, "BOOST"
illuminates.
1
2
3
4
5
6
9
8
11
12
Soft Buttons
10
Weld Operation Button
Opens the Weld screen (weld units only).
11
Battery Charge Operation Button
Opens the Battery Charge screen. On the
Battery Charge screen, the user can start
and stop battery charge and change
12V/24V operation.
12
Air Compressor Operation Button
Turns air compressor On or Off.
13
Settings Button
Press to access System Settings,
Maintenance, and System Info screens.
2
3
13