Miller Spectrum 300 Manual do Proprietário - Página 18
Procurar online ou descarregar pdf Manual do Proprietário para Sistema de soldadura Miller Spectrum 300. Miller Spectrum 300 32 páginas. Air plasma cutter
Também para Miller Spectrum 300: Manual do Proprietário (21 páginas), Manual do Proprietário (32 páginas)
Imprimir página
- 1. Specifications for Units Connected to a 30 Ampere, 115 Volt Circuit or a 15 Ampere, 230 Volt Circuit
- 2. Specifications for Units Connected to a 20 Ampere, 115 Volt Circuit or a 10 Ampere, 230 Volt Circuit
- 3. Connecting Work Clamp and Gas/Air Supply
- 4. Section 5 - Maintenance & Troubleshooting
- 5. Troubleshooting
- 6. Section 6 - Electrical Diagram
- 7. Section 7 - Parts List
- 8. Options and Accessories
3-7. Connecting Work Clamp And Gas/Air Supply
2
6
From Gas/Air Supply
Tools Needed:
5/8, 1-1/8 in
OM-2210 Page 14
1
3
4
5
1
Work Clamp
2
Workpiece
Connect work clamp to a clean,
paint-free location on workpiece, as
close to cutting area as possible.
.
Use only clean, dry air with 70
to 150 psi (483 to 1034 kPa)
pressure.
3
Air Filter/Regulator
4
Gas/Air Inlet Opening
5
Hose
6
Teflon Tape
Obtain hose with 1/4 NPT right-
hand thread fitting. Wrap threads
with teflon tape (optional) or apply
pipe sealant, and install fitting in
opening. Route hose to gas/air
supply.
Adjust gas/air pressure according
to Section 4-1.
Ref. 801 319-C / Ref. 801 306-C