aquantica at2i Manual de instruções - Página 4
Procurar online ou descarregar pdf Manual de instruções para Acessórios para câmaras aquantica at2i. aquantica at2i 16 páginas. For the canon t2i
Imprimir página01.
SHUTTER RELEASE LEVER: Pulling the shutter release lever back part way activates the camera meter and auto focus. Pulling the lever back all
the way fires the camera.
02.
MAIN DIAL ACCESS KNOB: Rotates clockwise and counterclockwise. Use alone or in combination with other controls to select
or set various camera functions or modes. In "Manual" this control is used either alone for shutter speed or with the AV mode lever in the back to
change aperture values (see camera manual).
03.
ON/OFF SWITCH LEVER: Rotate to turn the camera power on.
04.
MODE DIAL ACCESS KNOB: Rotate to select the proper shooting mode.
05.
BULKHEAD CONNECTOR: This bulkhead connector may vary according to the owner preferences, (see page 9)
06.
BULKHEAD CONNECTOR: This bulkhead connector may vary according to the owner preferences, (see page 9)
07.
HYDROPHONE: This optional hydrophone is shown mounted on the accessory bulkhead provided on the Aquatica T2i/550D housing, it will
capture ambient sound while video recording underwater, it's design is made to be effective underwater and will not function properly if not
immersed.
08.
FOCUS/ZOOM KNOB: Turning allows manual focus of a single focus lens or rotation of the zoom mechanism of a lens.
09.
FOCUS/ZOOM KNOB RETRACTOR: Turning allows manual focus of a single focus lens or rotation of the zoom mechanism of a lens.
10.
FOCUS/ZOOM PINION GEAR: Engages and operates the focus or zoom gear attached to the lens.
11.
CAMERA INTEGRATED FLASH BUTTON: Pushing this button will pop open the integrated flash of the camera, only use when shooting optically
triggered strobes.
12.
LENS RELEASE KNOB: activates the lens release button on the camera allowing easy removal of the lens.
13.
LENS RELEASE KNOB LEVER: Applies pressure on the camera lens lock button
14.
PORT RELEASE MECHANISM BUTTON: Press down to release the locking mechanism when installing or removing a port or extension.
15.
REMOVABLE CAMERA TRAY: Used to attach camera and slide in housing.
16.
HOT SHOE CONNECTOR: connects the camera to the Flash Bulkhead. Slide this Connector into the camera Hot Shoe.
When detaching do not pull the cord as this might damage the electrical connections.
17.
BAYONNET MOUNTING FLANGE: allows the mounting of different ports and extension rings on the housing.
18.
HAND GRIPS (X2): Left and right grip allowing the mounting of strobe arms and accessories.
19.
GRIP'S ACCESSORIES MOUNTING HOLES: Two 1/4-20 TPI holes on each grip are ready to accept TLC Base Brackets or TLC Base Ball
for strobe arms or accessories.
20.
LATCHES: Two heavy duty latches with safety locks to protect against accidental opening.
21.
ISO SETTING LEVER: Push to engage the ISO sensitivity.
22.
IINTERNAL FLASH SHUT DOWN KNOB: Rotate to lower the internal built in flash of the camera
23.
MOUNTING HOLE FOR ACCESSORY: a 1/4"-20 TPI hole is supplied to accept a TLC accessory or TLC base ball for mounting a
strobe arm or a modeling light.
24.
(*) STAR ACCESS LEVER: This lever access both the AF-E & AF-L features as well as the Star which is a highly customizable button,
theses are important controls for video shooting and care should be taken to fully understand their working and subtleties.
25.
REMOVABLE VIEWFINDER: A full view of the illuminated camera viewfinder displays all necessary information.
This viewfinder be removed and replaced with optional Aqua View Finder for a larger displayed image.
26.
APERTURE / EXPOSURE COMPENSATION LEVER : This lever when engaged will give the user access to aperture value in manual
mode, in automatic ones, it will give access to exposure compensation.
27.
AF POINT SELECTOR / MAGNIFY BUTTON: Press this button to select the focus point or to magnify the image in playback mode
28.
LIVE VIEW / MOVIE MODE START-STOP BUTTON: Push to start or stop Live View or Movies mode.
CONTROLS IN DETAIL
page 3