Miller XR-Pistol-Plus Manual do Proprietário - Página 16
Procurar online ou descarregar pdf Manual do Proprietário para Sistema de soldadura Miller XR-Pistol-Plus. Miller XR-Pistol-Plus 32 páginas. Air and water-cooled guns
Imprimir página
6-3. Shielding Gas
6-4. Sequence Of Gas Metal Arc Welding (GMAW) − Continuous Or Spot
Install &
Connect
Personal Safety
Equipment
6-5. Coolant Supply For Water-Cooled Models Only
3
2
Application
Coolant
*HF: High Frequency Current
**MILLER coolants protect to -37
OM-248663 Page 12
2
1
Put On
Set Controls
Equipment
1
GMAW Or Where Coolant
Contacts Aluminum Parts Or
Where HF* Not Used
MILLER Aluminum Protecting
Coolant No. 043 809**;
Distilled Or Deionized Water OK
°
°
Above 32
F (0
C)
°
°
F (-38
C) and resist algae growth.
3
Turn On Gas
Turn On Feeder
And Water (If
And Welding
Applicable)
Power Source
1
Shielding Gas Cylinder
2
Valve
3
Gun Trigger
Open valve on cylinder just before
welding.
Gun trigger turns weld output and
gas flow on and off (see Section
6-1).
Close valve on cylinder when
finished welding.
sb5.1 6/92 − S-0621-C / Ref. T0001-A
Begin Welding
ssb6.1* 9/92
1
Coolant Supply
2
Coolant "In"
3
Coolant "Out"
See table below for coolant
guidelines.
Turn On coolant supply before
welding.
Turn Off coolant supply when
finished welding.
Ref. 150755-A