Miller 261970 Manual de instruções original - Página 33
Procurar online ou descarregar pdf Manual de instruções original para Acessórios de soldadura Miller 261970. Miller 261970 40 páginas. Integrated headgear cooling system
Imprimir página
4-3.
Maintenance And Storage
Replace damaged or dirty filter. Do not wash filter, clean with compressed air,
or reuse dirty filter.
Never use solvents or abrasive cleaning solutions to clean the headgear cool-
ing system. Keep water and other fluids out of blower assembly.
Replace cowl (head shroud) (part no. 261971) after 50 washings. Shroud loses
its fire retardant properties with repeated washing.
For best performance clean the equipment after each use. Use a soft cloth dampened with
a mild soap and water solution to wipe all external surfaces clean. Allow to air dry.
Product usage, workplace contamination levels, and other factors affect the life of the fil-
ter. Replace filter if air flow is reduced due to a dirty filter (see Section 3-6).
Inspect flexible tube and replace if damaged or if inside of tube is extremely dirty.
If the headgear cooling system will not be used for an extended period, remove the filter
and battery and store in a clean, dry place free of solvent-based vapors them and at a
temperature of −4° to 86° F (−20° to 30° C). Charge battery to 50 percent capacity before
storage.
OM-262 902 Page 30