Miller ArcReach SuitCase 12 Manual do Proprietário - Página 20
Procurar online ou descarregar pdf Manual do Proprietário para Acessórios de soldadura Miller ArcReach SuitCase 12. Miller ArcReach SuitCase 12 48 páginas.
Imprimir página
5-7. Connecting Shielding Gas
3
2
5-8. Connecting Weld Cable
1
3
OM-278792 Page 16
4
1
2
NOTICE − This feeder has a shield-
ing gas filter that requires special
attention when cleaning. See Sec-
tion 7-3 for proper cleaning instruc-
tions.
1
Gas Hose With 5/8-18
Right-hand Thread Fittings
(Customer Supplied)
.
Tighten gas hose fitting to a
maximum of 100 in. lbs (12
Rear View
.
N
2
Shielding Gas Cylinder
.
Shielding gas pressure not to
exceed 100 psi (689 kPa).
3
Valve
4
Flowmeter
Close valve on cylinder when fin-
ished welding.
!
Turn off power before
connecting to weld terminal
or receptacle.
!
Failure to properly connect
weld cables may cause
excessive heat and start a
fire, or damage your
machine.
1
User-Supplied Weld Cable
Follow wire manufacturer's recom-
mendations for weld cable polarity.
2
Male Connector
3
User-Supplied Female
Connector
Connect
connectors.
m).
256 620-A
male
and
female
256621-A