Miller MIGmatic M-25 Manual do Proprietário - Página 5
Procurar online ou descarregar pdf Manual do Proprietário para Acessórios de soldadura Miller MIGmatic M-25. Miller MIGmatic M-25 12 páginas. Air-cooled guns for gmaw and fcaw welding
Também para Miller MIGmatic M-25: Manual do Proprietário (20 páginas), Manual do Proprietário (8 páginas)
Imprimir página
7.
Replacing Head Tube (M-40)
1
Secure head
tube in vice.
5
1/8 in
7/8 in
5/16 in
Y Disconnect gun first.
3
Loosen cable connec-
tor. Remove from vice
and turn head tube
out by hand.
2
Remove switch
housing.
Loosen set screws
on body and remove
1/8 in
head tube.
7
Hand-tighten head tube into cable connector. Place
head tube in vice and tighten to within 1/8 in (3 mm)
spacing between cable connector and body.
Do not disturb cable connec-
tion between cable connector
and connector nut.
4
Slide handle.
6
Install new head tube. Tighten set
screws to keep head tube in de-
sired position.
Install shock washer from
existing head tube.
8
Reposition handle and
install switch housing
(see Section 8).
ST-800 751-B
OM-180 516 Page 5