Miller S-75SC Manual do Proprietário - Página 23

Procurar online ou descarregar pdf Manual do Proprietário para Acessórios de soldadura Miller S-75SC. Miller S-75SC 40 páginas.

Imprimir página

5-12. Setting Internal DIP Switches

Run-In Enabled

(Factory Default)

S1-1

Run-In feature is available.

X - Means switch may be in either

position.

If 14 pin power cable from pow-

er source does not provide volt-

age and current feedback, Run-

In will automatically disable.

Position Settings And Results For DIP Switch S1 On PC1

Run-In Disabled

S1-1

Run-In feature is not avail-

able. X - Means switch may

be in either position.

Factory Set Default Set-

tings For DIP Switch S1

In the DIP switch S1 illustrations,

the elevated slider on each switch

is shown in white. For example,

the switches above are in the Off

position.

Automatic Run-In

(Factory Default)

S1-1 And S1-2

Run-In speed is approxi-

mately 1/2 weld wire feed

speed.

Remove wrapper.

DIP Switch S1 On Motor

Board PC1

S1-1

Run-In enable or disable.

S1-2

Automatic Run-In versus Manual

Adjustment Run-in

Install wrapper when finished.

Tools Needed:

1/4 in

Manually Adjusted Run-In

S1-1 And S1-2

Run-In speed is set using poten-

tiometer P1 located on Motor

Board PC1.

P1 is a 25 turn potentiometer.

803 063 / Ref. 802 944

OM-223 605 Page 19