Miller 1020 Manual do operador - Página 6

Procurar online ou descarregar pdf Manual do operador para Acessórios para câmaras Miller 1020. Miller 1020 12 páginas. Arrow series fluid head with euro camera platform

Imprimir página

OPERATING INSTRUCTIONS

The Operating Instructions for Arrow series fluid heads are

described in six (6) steps. Please read and understand these

instructions before using this equipment. Do not omit any

step.

1 INSTALL AND LEVEL THE HEAD

1.1 Unscrew the CLAMP NUT from its threaded stud.

1.2 Place the head in your 100mm tripod bowl and re-fit the

CLAMP NUT. Do not tighten CLAMP NUT.

1.3 Level the fluid head by centering the bubble in the

BUBBLE LEVEL. Then tighten the CLAMP NUT.

1.4 In low light conditions the BUBBLE LEVEL can be

illuminated by pressing the ILLUMINATION BUTTON.

1.5 Note: If adjusting the level with your camera mounted,

first ensure the camera is securely held before loosening

CLAMP NUT.

ILLUMINATION BUTTON

BUBBLE LEVEL

TRIPOD BOWL

THREADED STUD

CLAMP NUT

FIG 3