Miller 1098 Compassx 18 Manual do operador - Página 7
Procurar online ou descarregar pdf Manual do operador para Acessórios para câmaras Miller 1098 Compassx 18. Miller 1098 Compassx 18 13 páginas. 16 cb plus fluid head compassx series
Imprimir página
Maintenance
x
The Compass
Fluid Head offers high quality surface coatings,
dust and moisture seals. Miller recommends keeping the Fluid
Head clean at all times by using soft brushes and lint free cloth
to wipe over the surfaces.
•
Do not immerse the Fluid Head in any liquid.
•
Do not use stiff brushes, abrasives, harsh detergents and
solvents.
Battery Replacement
x
The Compass
Fluid Head uses a single 11A type - 6 Volt bat-
tery for Illumination. Miller recommends the following batteries
to provide long life performance – GP11A, Duracell MN11 or
Vinnic L1016.
1. Using a Phillips Head #1 screw driver, remove the
RETAINING SCREW and the BATTERY COVER.
2. Using a small flat screw driver remove the battery.
3. Align the new battery as shown on the back of the
BATTERY DOOR and place into the BATTERY HOUSING,
then push down the battery into place. A small flat screw
driver may be used to push down the battery into the
BATTERY HOUSING.
4. Align the BATTERY DOOR into the body then tighten the
screw lightly.
7
Battery
Battery Cover
Fig. 6