Miller 16 CB PLUS 1107 Manual do operador - Página 6
Procurar online ou descarregar pdf Manual do operador para Acessórios para câmaras Miller 16 CB PLUS 1107. Miller 16 CB PLUS 1107 16 páginas. Fluid head
Imprimir página
Operating Instructions
2. Camera Set-up
2.1 Remove the CAMERA PLATE by pulling and holding
the SAFETY RELEASE PIN then pulling the SIDE LOAD
LOCK LEVER outwards. Press the SAFETY LATCH
BUTTON and remove the CAMERA PLATE from the
BASE PLATE (Fig. 6).
2.2 Attach the CAMERA PLATE to the camera and securely
tighten the screws. Refer to the Camera's owner's
manual for correct method of attachment to the
CAMERA PLATE.
2.3 Attach camera accessories and the battery to the
camera, it is recommended to estimate the camera's
Centre of Gravity (C of G) for the purpose of correctly
positioning the camera on the CAMERA PLATE. The
camera's C of G can be estimated by placing the camera
on to a round rod and then shifting it backwards or
forwards until a balance point – C of G – is achieved. It
is recommended to identify this point on the CAMERA
PLATE as it will be useful in step 2.5.
Camera Plate
Platform
Safety Release Pin
6 6
Safety Latch Button
Side Load Lock Lever
Fig. 6