Miller Digital Performance Series Manual do Proprietário - Página 8
Procurar online ou descarregar pdf Manual do Proprietário para Acessórios para motociclos Miller Digital Performance Series. Miller Digital Performance Series 32 páginas. Auto-darkening helmets
Também para Miller Digital Performance Series: Manual (32 páginas), Manual (28 páginas)
Imprimir página
SECTION 3 – SPECIFICATIONS
�
Please register your product at
Specification
Viewing Field
Operating Modes
Reaction Time
Available Shades
All Shades Provide Con-
tinuous UV And IR
Protection.
Sensitivity Control
Adjustable For Varying
Ambient Light And Weld-
ing/Cutting Arc. No. 10
Setting Locks Lens In
Dark State.
Delay Control
Slows Lens Dark-To-Light
State.
Automatic Power
Low Battery Light
Power Supply
Sensors
Operating Temperature
Storage Temperature
Total Weight
Standards
Warranty
OM-256476 Page 6
www.MillerWelds.com/Support/Registration
Digital Performance Helmet
3.81 x 1.85 in. (97 x 47 mm)
Three Modes: Weld, Cut, Grind
0.0000500 sec (1/20,000)
Weld Mode Darkened State:
No. 8–No. 13 Light State: No. 3
Cut Mode Darkened State: No.
5–No. 8 Light State: No. 3
Grind Mode Light State: No. 3
Weld Mode: No. 0–No. 10
Cut Mode: No. 0–No. 10
Grind Mode: Not Applicable
Weld Mode: No. 0–No. 10
Cut Mode: No. 0–No. 10
Grind Mode: Not Applicable
Shuts Lens Off 45 Minutes After Last Arc Is Struck. Lens Auto-
matically Turns On When Arc Is Struck.
Red LED LightsTo Indicate 2-3 Days Remaining Battery Life.
Panasonic CR2450 Lithium Batteries (2) (Miller Part No. 217043)
Independent/Redundant
(Three)
14°F to 131°F / -10°C to +55°C
�
When Stored In Extremely Cold Temperatures, Warm Hel-
met To Ambient Temperature Before Welding.
-4°F to 158°F / -20°C to +70°C
�
When Stored In Extremely Cold Temperatures, Warm Hel-
met To Ambient Temperature Before Welding.
17 oz. (481.9 g)
Meets ANSI Z87.1+ And CSA Z94.3 Standards
Three Years From Date Of Purchase (See Section 11)
Digital Elite Helmet
3.81 x 2.62 in. (97 x 60mm)
Four Modes: Weld, Cut, Grind,
X-Mode
0.0000500 sec (1/20,000)
Weld Mode Darkened State:
No. 8–No. 13 Light State: No. 3
Cut Mode Darkened State: No.
5–No. 8 Light State: No. 3
Grind Mode Light State: No. 3
X-Mode Darkened State: No.
8–No. 13 Light State: No. 3
Weld Mode: No. 0–No. 10
Cut Mode: No. 0–No. 10
Grind Mode: Not Applicable
X-Mode: No. 0–No. 10
Weld Mode: No. 0–No. 10
Cut Mode: No. 0–No. 10
Grind Mode: Not Applicable
X-Mode No. 0–No. 10
Independent/Redundant (Four)
And Magnetic (In X-Mode)
18 oz. (510.3 g)