Miller Titanium 9400i Manual - Página 26
Procurar online ou descarregar pdf Manual para Acessórios para motociclos Miller Titanium 9400i. Miller Titanium 9400i 40 páginas. Auto-darkening w/infotrack
![Miller Titanium 9400i Manual](/uploads/products/server2/3575000/3575000.jpg)
SECTION 8 − INSTALLING OPTIONAL MAGNIFYING LENS
1
NOTICE − Never use solvents or abrasive cleaning detergents.
NOTICE − Do not immerse the lens assembly in water.
The helmet requires little maintenance. However, for best performance clean after each use. Using
a soft cloth dampened with a mild soap and water solution, wipe the cover lenses clean. Allow to air
dry. Occasionally, the filter lens and sensors should be cleaned by gently wiping with a soft, dry cloth.
OM-256 016 Page 24
SECTION 9 − MAINTENANCE
1
Optional Magnifying Lens
Starting at the bottom, slide magni-
fying lens into the helmet retaining
brackets. Align the magnifying lens
with the auto-darkening lens as-
sembly.
D Remove lens holding frame
(with auto-darkening lens)
from helmet shell.
D Remove auto-darkening
lens from lens holder.
D Position lens holder so the
magnifying lens holding
tabs are facing toward you.
From the bottom up, slide
magnifying lens into posi-
tion. (Slide magnifying lens
up or down slightly as de-
sired.)
D Reinstall the auto-darkening
lens in the lens holder.
D Reverse procedure to re-
move magnifying lens.
.
To prevent lens fogging, install
flat side of magnifying lens to-
ward auto-darkening lens.
804 818