Miller ICE-40C Manual do Proprietário - Página 18
Procurar online ou descarregar pdf Manual do Proprietário para Lanterna Miller ICE-40C. Miller ICE-40C 40 páginas. Air-cooled torches for plasma arc cutting
Também para Miller ICE-40C: Manual do Proprietário (40 páginas), Manual do Proprietário (38 páginas)
Imprimir página
4-9. Selecting A Location And Connecting Input Power
18 in (457 mm) of
space for airflow
OM-2239 Page 14
Y Do not move or operate unit
where it could tip.
Y Always connect
Green Or
Green/Yellow
Install conductors into
a deenergized line
disconnect device.
3
.
Serial Number/Rating Label located on
rear panel of plasma cutter; use label to
determine input power for unit.
= GND/PE
grounding conductor first.
4
L1 (Black)
L2 (White)
1
2
L2
1
Plug (NEMA Type 6-50P)
2
Receptacle
(NEMA Type 6-50R)
Connect plug to receptacle.
3
Input And Grounding
Conductors
For single-phase operation:
Y Make
input
power
connections to the machine
before making connections
into
a
deenergized
line
disconnect device. In the line
disconnect device, always
connect
green
green/yellow
grounding
conductor
to
supply
grounding terminal
first,
never to a line terminal.
Connect directly to line disconnect
device if hard wiring is required.
4
Line Disconnect Device
See Section 4-7.
Y Special installation may be
required where gasoline or
volatile liquids are present −
see NEC Article 511 or CEC
Section 20.
L1
230 VAC, 1
208 959 / 803 222
or