Miller OBT-600 Manual do Proprietário - Página 10
Procurar online ou descarregar pdf Manual do Proprietário para Lanterna Miller OBT-600. Miller OBT-600 16 páginas. Torches for automated applications
Imprimir página4-1. Safety Equipment
SECTION 5 – MAINTENANCE AND TROUBLESHOOTING
5-1. Maintenance Schedule
Each Spool Of Wire
Blow out gun liner.
5-2. Troubleshooting Table
Trouble
Wire does not feed.
Wire is not energized.
Wire feeds unevenly.
OM-1596 Page 6
SECTION 4 – OPERATION
1
Clean nozzle
and check contact tip.
Check contact tip. Check for kinks in outlet cable. Check connections at wire drive assembly. Have
nearest Factory Authorized Service Station/Service Distributor check automatic equipment and weld-
ing power source.
Check contact tip. Check connections at wire drive assembly. Have nearest Factory Authorized Ser-
vice Station/Service Distributor check automatic equipment and welding power source.
Check contact tip. Check for kinks in outlet cable. Blow out gun liner and outlet cable casing.
Wear the following while handling
flux or welding:
1
2
2
Y Turn Off all power before maintaining.
3 Months
Replace cracked parts.
Remedy
Dry, Insulating Gloves
Safety Glasses With Side
Shields or Goggles
sb3.1 1/94