Chromalox WCRT-100 Instruções de instalação e operação - Página 4

Procurar online ou descarregar pdf Instruções de instalação e operação para Termostato Chromalox WCRT-100. Chromalox WCRT-100 4 páginas. Weather-corrosion resistant room thermostat

Imprimir página

After installation and wiring, to check the operation of heating

systems:

1. Disconnect power.

2. Place the heat/cool selector switch, if applicable, in the heat

position.

3. Adjust the setpoint ten or more degrees below the temperature

of the controlled space.

4. Restore power.

5. Slowly adjust the setpoint upward. When the setpoint reaches

the approximate temperature of the controlled space, the heat-

ing equipment should start.

TESTING AND OPERATION

Limited Warranty:

Please refer to the Chromalox limited warranty applicable to this product at

http://www.chromalox.com/customer-service/policies/termsofsale.aspx.

1347 HEIL QUAKER BLVD., LAVERGNE, TN 37086

Phone: (615) 793-3900

To check the operation of the cooling systems:

1. Disconnect power.

2. Place the heat/cool selector switch, if applicable, in the cool

position.

3. Adjust the setpoint ten or more degrees above the temperature

of the controlled space.

4. Restore power.

5. Slowly adjust the setpoint downward. When the setpoint

approximates the temperature of the controlled space, the cool-

ing equipment should start.