AQUAPHOR S800 Manual de operação - Página 3
Procurar online ou descarregar pdf Manual de operação para Dispensador de água AQUAPHOR S800. AQUAPHOR S800 20 páginas.
Imprimir página
Specifications
Maximum capacity, g
Maximum compensated hardness, mg/l
Maximum concentration of dissolved iron and manganese, mg/l*
Minimum pH
Temperature of water and environment, °C
Water pressure, MPa
Minimum water flow for backwash, l/min**
Maximum flow to drain during regeneration, l/min
Nominal / maximum flow, l / min
Pressure loss at flow 22.7 l/min (6 gpm), MPa***
Capacity in HE mode, kg of salt / gram of hardness
Capacity in HC mode, kg of salt / gram of hardness
Maximum capacity in AU mode, kg of salt / gram of hardness
Regeneration method
Power options
Connection ports (NPT)
Minimum drain line diameter, mm (in)
Filtration tank size (ID × H), mm
Height, cm
Base, cm
Gross weight, kg
Superfine monodisperse ion exchange resin, l
Quartzite, kg
or KDF85****, l
*
Reducing the concentration of iron to 0.3 mg/l and below, manganese - to 0.1 mg/l and below.
**
The flow rate must be checked at the end of the drain line.
*** For the correct selection of the filter, use the operating capacity and pressure drop. Long-term operation at flows higher than
those tested (more than 30 l/min) may lead to a decrease in cleaning efficiency.
**** Only for version S800 P1.
Filter medium and its quantity
1680
1380
12
6
+5...+38
0,14–0,7
7,6
9,1
25 / 38
0,1
1,1 / 670
3,0 / 1406
5,4 / 1680
Intelligent, by water meter
12 VAC; 50/60 Hz;
0.015 kWh
1" (MNPT)
16 (5/8)
267 × 584
70,6
40,4 × 48,5
43
23
0,8
0,35
3