3B SCIENTIFIC 3B Netlog Manual de instruções

Procurar online ou descarregar pdf Manual de instruções para Instrumentos de medição 3B SCIENTIFIC 3B Netlog. 3B SCIENTIFIC 3B Netlog 8 páginas.

3B SCIENTIFIC
1000539 (115 V, 50/60 Hz)
1000540 (230 V, 50/60 Hz)
Instruction manual
06/14 MEC
1. Safety instructions
To guarantee the safe functioning of the
3B NETlog™ equipment, it is necessary to
abide by the following instructions:
Do not connect the 3B NETlog™ device to
a voltage in excess of ±20V or current in
excess of ±2A.
Make sure the 3B NETlog™ device does
not come into contact with water.
The 3B NETlog™ device should not be
exposed to temperatures above 80°C.
The operating voltage input is protected
against polarity reversal. However, it is not
protected against excess voltage.
Do not apply voltage in excess of 4.5V to
the operating voltage input.
2. Scope of delivery
1
3B NETlog™ device
1
Power supply unit (4.5V DC, 300mA)
1
USB cable
1
Installation CD
®
PHYSICS
3B Netlog™
1
3. Introduction
3B NETlog™ is a multimedia data acquisition
and evaluation system for current and voltage
measurements and for measurements using
sensors. The system can be used with or with-
out being connected to a computer. With the
accompanying 3B NETlab™ software, meas-
urements can be conducted with arbitrarily
chosen parameters as well as in prepared
experiments. The prepared experiments take
the user through an interactive experimental
environment where the measurement parame-
ters have already been defined. When used
within a network, the teacher and students can
mutually monitor their results.
Without being connected to a computer, the
3B NETlog™ device can be used as a digital
multimeter for current and voltage measure-
ments. Combined with different sensors, the
3B NETlog™ equipment can also be used as a
handheld unit with automatic sensor recogni-
tion.