Diamond CB15HT-W7 Manual de instruções Instruções de utilização e manutenção - Página 7

Procurar online ou descarregar pdf Manual de instruções Instruções de utilização e manutenção para Equipamento comercial para alimentos Diamond CB15HT-W7. Diamond CB15HT-W7 9 páginas. Hot cabinets

Imprimir página

The unit is equipped with the plug and electrical cable mod.

Schuco (fig. H).

The cable has to be connected at 3 mt. max. to a 10A max.

magnetothermal disconnector. Never connect the cable to main

supply line directly.

Two 8 A fuses are installed inside the electrical control panel.

Verify that the power supply voltage is as indicated on the

machine rate plate (fig. C)

Power supply

230 V

220 V

110 V

To ensure correct operation, the maximum voltage variation

must be between +/- 6% of the nominal value.

We recommend to connect the unit to a dedicated circuit and

not to use damaged sockets, extension sockets or multiple

sockets.

In case of incompatibility between the socket and the plug of

the refrigerated cabinet, the plug should be replaced with a

suitable one by a qualified technician.

PROHIBITION

During the electrical connection it is forbidden:

-To use adapter sockets or extension sockets.

-To connect other appliances to the same power socket.

-To pull the electrical cable or the unit to unplug the

equipment from the socket (fig. I).

-To use extension sockets, worn down cables, cables with

damaged or fissured insulation as they are very

dangerous: they could cause sparks, electric shock and

fire.

-It is absolutely prohibited to pass cables and connect

other sockets under the refrigerated counter.

ATTENTION:

During the electrical connection verify:

- The power supply cable has to be laid in such a way as to

prevent it from being damaged or becoming hazardous to

people and things.

- In case the power supply cable is damaged, it should be

replaced only by a qualified technician (electrician) with

an equivalent cable.

- The cable of the equipment should be checked regularly.

If it should result that the cable is damaged or

deteriorated, disconnect the equipment and do not use it

and let the cable be replaced with an original replacement

part by an authorised technician.

- Protect the cable in such a way as to prevent twisting or

interlacement with other cables, trample on, crushing,

stretching.

A wrong installation could cause damages to people,

animals or things, for which the manufacturer cannot be

deemed responsible.

50 Hz single phase

60 Hz

12) FIRST CAREFUL CLEANING AND PUT IN ACTION

OBLIGATION

IMPORTANT – DURING THE WHOLE CLEANING

OPERATION USE WORKING GLOVES OF CLASS II

TO PROTECT YOUR HANDS ALL THE TIME AND

THE PERSONAL PROTECTIVE EQUIPMENT

ACCORDING TO THE LAW OF YOUR COUNTRY.

Before switching on the unit, take away the protective film that

covers some external and internal parts of the cabinet (for

example the display surface, etc.). Clean the refrigerated cabinet

thoroughly, both inside and outside, using warm water (max. 30°

C) and a solution of bicarbonate of soda (1 tea spoon every 2

liters) or white vinegar. Carefully dry the unit with a soft cloth.

PROHIBITION

During the cleaning operation it is forbidden:

- To use detergent products, metal pads or abrasive

substances that could damage the aesthetic appearance of

the equipment. - To use sharp objects (any damage

resulting from the use of these objects will not be covered

by warranty).

- To spray water directly on the electric parts and to wet

the electrical parts (lighting, electrical cables, etc.).

- To wash the refrigerated cabinet with water jets.

Once the cleaning is finished, switch the unit on through the ON/

OFF switch. Select the desired temperature on the thermostat

and wait until the cabinet reaches this temperature.

PROHIBITION

We recommend never exceeding 70°C.

ATTENTION

During the working of the equipment never touch the hot

surfaces.

We suggest to protect the upper limbs with personal

protective equipment that protect from heat and accidental

contact with hot parts.

To switch the equipment off:

-Adjust the thermostat on 0 position.

-Switch the unit off through the ON/OFF switch. -

Switch the light off through the ON/OFF switch. -

Disconnect the power supply cable.

-Allow the equipment to cool completely.

-Clean the equipment.